Amazon failed to adequately alert more than 300,000 customers to serious risks—including death and electrocution—that US Consumer Product Safety Commission (CPSC) testing found with more than 400,000 products that third parties sold on its platform.
The CPSC unanimously voted to hold Amazon legally responsible for third-party sellers’ defective products. Now, Amazon must make a CPSC-approved plan to properly recall the dangerous products—including highly flammable children’s pajamas, faulty carbon monoxide detectors, and unsafe hair dryers that could cause electrocution—which the CPSC fears may still be widely used in homes across America.
While Amazon scrambles to devise a plan, the CPSC summarized the ongoing risks to consumers:
If the [products] remain in consumers’ possession, children will continue to wear sleepwear garments that could ignite and result in injury or death; consumers will unwittingly rely on defective [carbon monoxide] detectors that will never alert them to the presence of deadly carbon monoxide in their homes; and consumers will use the hair dryers they purchased, which lack immersion protection, in the bathroom near water, leaving them vulnerable to electrocution.
Instead of recalling the products, which were sold between 2018 and 2021, Amazon sent messages to customers that the CPSC said “downplayed the severity” of hazards.
In these messages—“despite conclusive testing that the products were hazardous” by the CPSC—Amazon only warned customers that the products “may fail” to meet federal safety standards and only “potentially” posed risks of “burn injuries to children,” “electric shock,” or “exposure to potentially dangerous levels of carbon monoxide.”
Typically, a distributor would be required to specifically use the word “recall” in the subject line of these kinds of messages, but Amazon dodged using that language entirely. Instead, Amazon opted to use much less alarming subject lines that said, “Attention: Important safety notice about your past Amazon order” or “Important safety notice about your past Amazon order.”
Amazon then left it up to customers to destroy products and explicitly discouraged them from making returns. The e-commerce giant also gave every affected customer a gift card without requiring proof of destruction or adequately providing public notice or informing customers of actual hazards, as can be required by law to ensure public safety.
Further, Amazon’s messages did not include photos of the defective products, as required by law, and provided no way for customers to respond. The commission found that Amazon “made no effort” to track how many items were destroyed or even do the minimum of monitoring the “number of messages that were opened.”
Rossmann did a review a few months ago of electrical fuses on Amazon. Very few of these electrical safety devices worked as advertised.
Yup and the all negative reviews are inexplicably removed.
If any physical store got a dangerous product, was made undeniably aware of the danger and continued to sell the product - they’d be in a lot of trouble.
Likely more than just removed. I’m pretty sure that I left one too many scathing reviews of products that were defective by design or outright frauds, now I can’t leave any reviews.
I straight up wouldn’t trust Amazon for any electrical safety device. Go to a hardware store or parts distributor.
Even a surge protector from a reputable brand could be suspect - Amazon lets counterfeit products on the storefront all the time, and most sellers barely list any specifications on product pages.
Just do not buy random non brand stuff? A Fluke multimeter will work the same regardless where you buy it.
Counterfeits apply to all stores. The local store in no way has the capability or knowledge to identify them. On Amazon I could at least get reviews to tell me about it.
In any case, testing is better than believing, regardless of anything else.
Local stores are more likely to get their product from reputable suppliers (yes, this varies) - on Amazon, you’re buying from whoever unless you specifically seek out an official store, if it exists. Also, Fluke has been posting about counterfeits for years; here is a post from 6 months ago, which would suggest it’s an ongoing issue.
Here is a 2021 post from Electrician Talk about electricians receiving multimeters that don’t ohm out correctly (kind of a big fucking deal). Additionally, if you buy products on Amazon from an unauthorized seller, even if the product works fine the warranty is generally void.
Edit: Also, to be pedantic, a multimeter isn’t an electrical safety device; I’m using that term to refer to protective devices like fuses, GFCIs, AFCIs, breakers, thermal overloads, etc.
*car fuses. But yeah, I don’t wanna be burned inside a car.
Its still an electrical fuse regardless of whether it goes into a car or a plug
we went from the amazon is burning to i am burning because of amazon
🎵 It’s the ciiiircle of liiiiiife… 🎵
deleted by creator
One of the biggest trust issues is that you literally cannot buy a product from a trusted seller.
If 20 sellers sell the same item, Amazon will pool all of those items at their warehouses and ship them to buyers regardless of which seller the buyer was told they were buying from. If one seller provides Amazon with a counterfeit product, every seller is now tainted with that product.
And if you complain, the site treats it as a mark against the seller, even though they destroyed any evidence of whether the seller was responsible or not by shuffling the items in inventory.
I’m not racist… BUT… I will not buy any product until I thoroughly look through the item description, seller profile, and determine that the seller is not a secret shop from some place in China. It’s so quickly slapped together and much of the time, terrible products. I get it. It’s Chinese and they go after speed over quality, but like… Anytime I’ve ever had an issue, the seller was always based in China.
It’s not about where it’s manufactured as much as it is about who wanted it manufactured. If it’s from a company that cares about its brand image like Anker, then you’re probably going to get a good product
To play China’s advocate for a sec… Could this also be a symptom of America’s new alpha sigma trend of drop shipping?
This is true, but also on the flip side, if you find your Nintendo DS Lite from almost 2 decades ago, and look at it, and the battery hasn’t turned spicy yet and you look on the battery and see it was made in China… it’s pretty impressive.
The cheap shit on Amazon however, yeah I wouldn’t trust it tbh.
It’s about who sets the quality control standards. Somebody experienced who cares, or nobody at all? Amazon doesn’t enforce safety.
Can’t wait for them to be hit with their 0.1% fine.
As is tradition.
The issue isn’t the fine. Amazon is breaking numerous federal laws by not managing what is being shipped by 3rd party sellers. They are violating several FAA regulations on thousands of packages daily. At some point they will have to put a plan in place to vet these packages and that will be EXTREMELY costly. We will see a dramatic shift in how Amazon does business in the near future.
Are you sure about that though? Do you really think they will be held accountable?
I don’t think they will be held accountable, they will be hit with a 0.1% fine, even if there are many deaths, and they will move on with their lives.
As is tradition.
Is it more costly than buying a senator or two? Cause I bet we’ll NOT see any major changes that could cost them real money.
It doesn’t matter what senators they have, if the FAA/TSA revoke their license to ship using air services they will lose billions.
There needs to be some serious fines for amazon when they fail to recall and remove unsafe products.
How about bathing the fucking turd Bezos with twenty faulty hairdryers that they failed to recall?
He’s not CEO any more. Andy Jassy is.
Okay, do it to them both. They’re both complicit.
Electrocute both then.
Nitpick: Electrocution is killing, by definition. (Perhaps they meant shock?)
Edit for those who don’t know: It’s a contraction of electric and execution.
Wheatley: “A very minor case of serious brain damage.”
Try using mathematical triangle recursive algorithms in geometric Octave code to protect against them. Don’t approach unusual electronics in general at this time.
I know cheep electronics are fun but please buy UL Listed stuff
Which means don’t buy electronics on Amazon because you can’t usually tell from the listing and if it is, it could just be counterfeit.
Given that there appear to be plenty of overseas sellers that will happily counterfeit a UL stamp, or copy an entire product - including UL stamp - but with different innards, how would we even know at this point?
UL aggressively performs market surveys to catch this kind of stuff
Which worked with physical stores but with Amazon where you have 100+ sellers hawking the same defective PoS under 100+ unpronouncable brand-names
Where is the list of products? It’s gotta be online somewhere.
i came in here to find out the same thing.
Maybe unpopular opinion, but I’m on the fence about this. I slightly subscribe to the conspiracy theory that many “certified” products are just ways to stifle competition while also justifying higher prices for “certified” products.
Take UL listed electronics for example. Sure, that might mean something on a full computer full of electronics, but a lamp is two fucking wires and a bulb. It’s not complicated. Even confirming proper metals are used to prevent shrinking and expansion is not complicated. But the same $15 lamp is $100 once it’s UL certified. The math doesn’t add up.
Like I said: On the fence. Maybe it’s the best way to ensure safe products, but it also seems like a great system for lining specific peoples pockets.
EDIT: Jesus people, read my post before you get all triggered. I’m not saying shit products don’t exist.
You clearly haven’t seen how bad “no-consequences cheap” can be with even simple electronics. Your lamp, for example:
Melting (under-spec or poor construction) AC wiring, poor material for the cord, switch or socket.
Melting / burning lampshade (yes, even with LEDs).
Electrocution risk - Loose connections, easily broken plug or lamp socket, switch, inappropriate (conductive) materials.**
And that’s not even considering larger-design problems - Lamps that are prone to falling over (and breaking, or melting other things), lamps that flex but not too much or they break exposing problems above, assemblies that aren’t reasonably child-proof, RF interference even.
The race to the bottom without rules is a dangerous place for the consumer expecting a bare minimum guarantee of fitness while inviting these products into their home, not to mention those most often buying the cheapest option may be the most vulnerable.
Dear Mr. High & Mighty, I’ve actually seen all those things - on UL certified devices.
But again, not my point. My point was a lamp isn’t complicated enough for the UL to charge so much that the price goes up 10x. If they are charging that much, there should be tons of competitors trying to get a piece of that pie. If they aren’t charging alot, then many of the products on Amazon, that are often certified by authorities in other countries, would also get UL certified. It has all the hallmarks of a racket.
I see you learned your discussion skills from the Donald Trump School of Bullshiting.
You mean by people disagreeing with me on points I never made?
LOL
but a lamp is two fucking wires and a bulb. It’s not complicated.
And yet, companies can and will cut corners whenever they can. Using too thin of wire or the wrong type of plastic can cause a fire. Cheap switches, bad insulators for the bulb socket are also things that they’ll cut corners on.
That’s not really the point I was going for. I’m not saying bad companies won’t make shit products. I’m just pointing out a lamp doesn’t require alot of effort for the UL to certify, so it can’t justify a 10x increase in cost. But they must be charging a ton or more companies would just get their products certified.
UL certification can mean different things, depending on the product and type of mark. It also isn’t that expensive to get UL listed as it isn’t like every single item you produce is tested. Each product you design is tested, but not each item you produce.
There are 3/4 types. UL listed, UL recognized, and UL classified. Certified is newer and more stringent.
- Recognized is mostly for machinery and components within machinery. It isn’t terribly difficult to get, but annoying. I have dealt with this type as we design and build electrical panels. Usually you hand the design to a panel builder and they will get it certified before delivery.
- Listed is for products and appliances, and is fully tested for safety. This applies to most consumer electronics.
- Certified Enhanced is also for products, and you can read up on it here: https://www.ul.com/news/qa-uls-enhanced-certification-mark
- Classified is for products and is half ass tested. All it means is that some requirements for UL were tested and passed, but not all.
If a product is Classified by UL, this can mean its testing meets the particular requirements for a single test with a published result, but has nothing to do with all the other tests that may form part of a Standard (i.e., UL 181).
As for pricing for UL listed, it can be just a few grand for a single product. Not much when you are selling thousands. I am sure Classified is even cheaper. I wonder how many of these cheap ass lamps say Classified.
I don’t know where you’re getting the idea that UL certified goods are super expensive. UL is the bare minimum. I have a $10 UL certified lamp on my desk right now. Certifications like TUV and similar are the more expensive ones.
