I hate that! Especially when it was the correct version and then magically one day it is some other one. One time it played that awful pop version of Professional Widow by Tori Amos and that was very upsetting until I found the normal version that sounds awesome.

I don’t call them Nazis. I call them monsters. Every single one of them. Got some Nazis in there too of course, but monsters are what they all are.

The patient is alive and under guardianship of his sister. He was able to dance with her at her wedding last year. Sounds like he has brain damage, as he has trouble with his memory, walking, and talking, but is a far leap from anything considered dead or a vegetable. I get that people think poorly of people who OD, but we don’t know this person or on what level of destruction they were on. I find it hard in this day and age to judge someone who wants to check out of reality.

One nuance and rather deceptive point of the article is the statistics only apply to “some” areas, not the whole. The people in NC, which is where that less than 1% comes from, those people got screwed. The one county they picked out of Florida was 20%. I feel like they just pick and chose the worst examples by county, instead of talking about the overall.

The only shitty thing is just how expensive absolutely everything has been. People selling their houses because insurance is so astronomically expensive that they can no longer afford to insure it. Of course this whole increase in extreme weather conditions is due to climate change, because we suck, and the planet was going to go through this eventually anyway, but it is mostly because we suck.

On the point of people not knowing they need flood insurance, you are right. Definitely callous, but this has been the norm for decades. The system is unfair, but insurance companies exist to make money, not help you. I don’t understand how they wouldn’t know this by now, that you need both. Especially in Florida. I remember even after Katrina it was talked about on the news for weeks about this practice.

It was the best custard ice cream I ever created. Made the base with a sous vide. Chef Steps has(?) the recipe, but I did some experiments with blueberries that was next level the best shit I ever made that I will unlikely ever be able to duplicate again.

Do you have a KitchenAid stand mixer or anything like that? Best thing I ever learned is making ice cream with dry ice. I just put the base in the mixer, start it with the paddle, and start putting in crushed up dry ice, one spoonful at a time. I managed to get dry ice in the little cubes or pellets, put it in a cloth sack, and then use a hammer or blunt object to break it up into small pieces.

Yeah, I think I remember something like 10-20k to refill the cooling on an MRI, and that is just topping it off as some is slowly lost. The helium is just used to cool it. Helium is helium, so no such thing as medical vs not. The cost to repair this thing is going to be absurd. They are making better machines now have little to no loss, but I don’t think those are super prevalent yet.

It was the SCADA view right? A lot of SCADA software is basically running on top of windows, though you typically would never see the desktop. Ignition at least is cross platform, but that is because the server is Java and Jython. A big part of why things are running on windows is due to OPC, which was traditionally all DOM and .NET. It is basically a standard communications protocol and is what allows your HMI/SCADA to communicate with PLCs. Otherwise, you use proprietary drivers and native PLC specific protocols.

SCADA programming/design is kind of an art and is usually written by an either an overworked engineer or someone who had far too much time on their hands. You basically build screens using specialized software, hook up buttons and UI elements to PLC signals, and pass some signals from the UI to the PLC. They are all heading in the Edge/iot/cloud/web based/techno-babble direction these days…

Ignition, programming software is free!: https://inductiveautomation.com

Some other random ones I have seen or used in the past: https://www.siemens.com/global/en/products/automation/simatic-hmi/wincc-unified.html https://www.aveva.com/en/products/intouch-hmi/ https://www.rockwellautomation.com/en-us/products/software/factorytalk/operationsuite/view.html

That is some definite bullshit. I am both a software developer and a controls engineer. That stuff irritates me to no end, but I also understand how these systems can fail. They will always protect themselves over the user/customer, so thus we suffer. Hell, I used to do Amazon projects on the controls/industrial side. Amazon had their own software systems that they built/stole running things overall, so thankfully I didn’t have to deal with trying to make them happy on the software side too. I much prefer programming the machinery.

Wtf. They must have screwed something up with a software update. Worst case you charge back, but that might get your account banned…

I always take it to my UPS store down the road instead of boxing it up and sending it out. You don’t package the item up at all. They scan the barcode on my phone and take the item. Done, return processed. If they steal it afterwards, not my problem since the code was scanned and you get a notification/receipt. They have a lot of strange locations you can take it to, including random big box stores.

Ok. Let’s do this! If you have a 4 cup pyrex/microwavable measuring cup, it is much easier.

• Sauce pan with a lid. Nonstick is fine.
• 2 cups of rice using dry measuring cup
• 3 cups of water
• Salt if using unsalted butter
• 2 tablespoons of butter

1. Put empty pan on stove and set heat to medium-high. If these are steel pans, stick to medium. Go towards high if nonstick as it takes a bit to heat up.
2. Put water and butter in microwavable cup and throw it in the microwave until it starts to simmer, maybe 3 minutes? Depends on microwave and dish.
3. While you are waiting on microwave, put dry rice in pan and gently stir/fold. They will start to turn white, but don’t let them burn. If you need to take the pan off and turn the heat down, do it. We are just preheating the rice and pan up. Add salt if needed.
4. Get ready. As soon as that water is hot enough to boil or close to, take it out, pour it in the pan. It will be violent.
5. Do a quick stir, throw the lid on, and turn the heat down to the lowest setting. The water should fully cover the rice.
6. Walk away. The bottom might toast a little, but that is fine as long as it doesn’t full on burn.

After 20 minutes or so, you can do a real quick check and if it looks kind of wet, throw the lid back on and wait.

At this point, you should have perfectly acceptable rice. Take the lid off, stir the rice with a more folding motion to let it steam any additional moisture out.

Long tangent, but I got the Edge or whatever stupid expensive version they have for the extra triggers/levers underneath. I have really small/short palms and don’t have the reach to push all the buttons properly. I wouldn’t be able to play Elden Ring at all without them. I roll and use potions with the levers instead. Even then, it is still painful after a while and some of the contortions I have to do at times can be annoying.

I have the issue of barely having enough “wrap” with my palm and pinky to grip around the hand things that are angled down a little too much. I absolutely despise that the dpad is one of those rocker pieces underneath instead of individual buttons. I will accidentally do a direction I didn’t intend because I rocked the down button too far to the right. It is because the controller still isn’t straight when I hold it. lt is partially rotated in my hand so I can get a little more reach upwards and it makes the dpad usable. Having to compensate the direction of joysticks is super fun. I basically have to death grip the controller with my right pinky and tightly squeezed palm to keep it stable.

When that accessible controller came out for the Xbox I was super bummed it wasn’t for all platforms yet. Doesn’t help I would need to have 2 kits to be able to have separate sides like joycons. Joycons have been my favorite controller of all time as I can comfortably hold them. I tried making a proof of concept sort of gel/shredded memory foam cover, which did help, but it didn’t solve the severe pain in my palm, especially the area under my pinky that I use to death grip the controller. After seeing the glove Martina made after she cut off her pinky, I want to try and make a glove next to take the pressure off, improve grip, and sort of brace/support the part of my hand that I keep hurting.

It sucks that accessories keep getting more expensive. I haven’t had any issues my my edge, but you bet I would be utterly infuriated if it didn’t last when it is almost half the price of the console itself. I have some mechanical keyboards and those things can really get up there in price too. Ergonomic mice are not exactly cheap either. I hate having to use a trackball but so far the only comfortable one is that Logitech one and I have to use the extra angled base it comes with. I game with it.

That blows. I never had a ps4, so I don’t know the whole deal about modding/rooting it. It is crazy that some of these devices have “fuses” that can brick your device if tampered with. It is my device dammit.

Most people don’t have a passport. It is expensive and a pain to get one. If you don’t ever leave the country, most see no reason to. We don’t have national IDs, but we do have state. Technically, they rolled out this new RealID crap that is probably closer to a national id, but you have to pay extra and it is still done through the state. Neither of these are required. If you drive, your drivers license is your ID. Otherwise, you can get a state id so you can get alcohol, weed, cigarettes, and other dumb shit. When you get your ID, you can register to vote right there if you qualify and I think you can get a paper card. There is no reason to go through any extra hoops once you register to vote. You are in the system as a registered voter.

🎶Little Mary Sunshine🎶

I love this movie. Reefer Madness.

One big difference is that one was done by an adult. Now we are faced with a whole bunch of kids who are fucked in the head with far more advanced weaponry compared to 1927. Yet the adults keep ignoring the kids and despite all previous warnings, continue to let it happen. If your child was already previously being investigated for threatening to shoot up a school, then you damn well better help them. Sell your guns and use the money to get them some therapy. If you get calls saying there are going to be shootings, you don’t sit there with your thumb up your ass until a bunch of people get massacred, yet that is exactly what happened.

The indifference, apathy, media sensationalism, and bullshit thoughts and prayers just make it worse. As soon as the media stops talking about it, it may as well never happened. Maybe some sob piece months later from the parents, but those are barely a footnote. Our country is fucked. Darkest timeline.

As someone who has been to these places, yeah, it is usually a bunch of migrant workers or children of migrant workers who already work there. I don’t think I have ever seen a white kid, much less adult, fulfilling those roles. They really do give the worst jobs to the people nobody gives a shit about. So yeah, these people are definitely poor as shit.

Autistic and neurodivergent people are the only ones I can even begin to relax enough to have a conversation. I have a lot of baggage and being undiagnosed in school was extremely damaging. I love to talk, but I make people uncomfortable. So I usually just sit quietly somewhere, move seats/tables as bigger groups want the space, and eventually leave once the anxiety/torture becomes too overwhelming.